*********************************************************************************
                         GH5KNx1 EC RELEASE NOTE

*********************************************************************************
---------------------------------------------------------------------------------
2017/4/11    		     EC Version 1.08.00 		Owner: Haidi.Wang
---------------------------------------------------------------------------------
File name:GH5KN_10.800   		Checksum: 00760E63h
1.Disable keyboard debug card
2.Fix 100% battery which UVP protected, can't wake up issue.
3.Support current limit for 150watt & 120watt adapter
4.Add solution for RTC timer stop going

---------------------------------------------------------------------------------
2017/2/22    		     EC Version 1.07.00 		Owner: Haidi.Wang
---------------------------------------------------------------------------------
File name:GH5KN_10.700   		Checksum: 007502F8h
1.Update temperature point for battery charging protect mode 
  (small charge current when battery under -1,5 release)

---------------------------------------------------------------------------------
2017/1/12    		     EC Version 1.06.00 		 Owner: Haidi.Wang
---------------------------------------------------------------------------------
File name: GH5KN_10.600  		Checksum:00750103h
1.Fix battery capacity depletion

---------------------------------------------------------------------------------
2016/12/20    		     EC Version 1.05.00			 Owner: Haidi.Wang
---------------------------------------------------------------------------------
File name: GH5KN_10.500  		Checksum: 00751827h
1.Keyboard back light keep status after warmboot
2.Fix boot on DC but SW_RELEASE not active
3.Fix SW_release behavier when plug out AC

---------------------------------------------------------------------------------
2016/12/9    		     EC Version 1.04.00			 Owner: Haidi.Wang
---------------------------------------------------------------------------------
File name: GH5KN_10.400  		Checksum: 00752F4Bh
1.Add Fn key scancode (0xE0 0x63)
2.Modify battery temperature throttling Lowest Level to 57 

---------------------------------------------------------------------------------
2016/12/7    		     EC Version 1.03.00			 Owner: Haidi.Wang
---------------------------------------------------------------------------------
File name: GH5KN_10.300  		Checksum: 0074F481h
1.Modify Speaker back light behavier in S3(Blinking Red)

---------------------------------------------------------------------------------
2016/11/30    		     EC Version 1.02.00			 Owner: Haidi.Wang
---------------------------------------------------------------------------------
File name: GH5KN_10.200  		Checksum: 0074D6FAh
1.Support RGB KB & Red KB when matched OEM Service 
2.Keep PWRBTN# OUTPUT pin in S3
3.Keep backlight level and winlock status after codeboot if AC not pull off 
4.Add logo led function as standard
5.Support Wifi Q_key & Panel Q_key for Hasee 

---------------------------------------------------------------------------------
2016/11/25    		     EC Version 1.01.00			 Owner: Haidi.Wang
---------------------------------------------------------------------------------
File name: GH5KN_10.100  		Checksum: 00758454h
1.Fix ELAN TP not keep status after S4/S5

---------------------------------------------------------------------------------
2016/11/22                   EC Version 1.00.00                  Owner: Haidi.Wang
---------------------------------------------------------------------------------
File name: GH5KN_10.000  		Checksum: 00757DD4h
1.1.Review GPIO as schematic changed for NPI phase
  (GPC6 for Boost FAN_EN1 & GPG0 for PANEL_3.3V_ON)
2.Update new fan table 20161117
3.Set GPG1 input pin as SW release off function when AC in
4.Set normal fan control enable after turning fan boost off in S0
5.Support 120watt adapter funtion when matched specific OEM Service

---------------------------------------------------------------------------------
2016/11/15                   EC Version 0.20.00                  Owner: Haidi.Wang
---------------------------------------------------------------------------------
File name:GH5KN_02.000  		Checksum: 0072E8FBh
1.Modify GPU & CPU performance in DC mode when adapter pulled out at time 0:
    a. PROHOT released @5sec, GPIO12 released @10sec
    b. 100% > RSOC > 70%GGPU D2  CPU P6APL1/PL2 = 25W
        70% > RSOC > 40%GGPU D3ACPU P13
        40% > RSOCG	  GPU D3ACPU PROHOT
    c.Not active for Power Battery HP Mode

---------------------------------------------------------------------------------
2016/11/5                   EC Version 0.19.00                  Owner: Haidi.Wang
---------------------------------------------------------------------------------
File name:GH5KN_01.900  		Checksum: 0072E9D0h
1.Set TP LED status consistent with MyApp
2.Support BIOS B.0.07

---------------------------------------------------------------------------------
2016/11/4                   EC Version 0.18.00                  Owner: Haidi.Wang
---------------------------------------------------------------------------------
File name:GH5KN_01.800  		Checksum: 00733154h
1.Welcome KB backlight changes color periodically by user's time setting

---------------------------------------------------------------------------------
2016/11/2                   EC Version 0.17.00                  Owner: Haidi.Wang
---------------------------------------------------------------------------------
File name:GH5KN_01.700  		Checksum: 0073C043h
1.Delay 5s send Qevent 0x76(HDMI status)during S3 resume to avoid resume too long.

---------------------------------------------------------------------------------
2016/10/29                  EC Version 0.16.00                  Owner: Haidi.Wang
---------------------------------------------------------------------------------
File name:GH5KN_01.600  		Checksum: 0073E044h
1.Get rid of some redundant code
2.Cancel low battery RSOC calibration to 12%
3.Adjust GPU & CPU performance according to AC or DC mode when boot in Windows

---------------------------------------------------------------------------------
2016/10/22                  EC Version 0.15.00                  Owner: Haidi.Wang
---------------------------------------------------------------------------------
File name: GH5KN_01.500		Checksum: 006C3E68h
1.Delay more 60ms before SYS_PWROK on in power on sequence
2.Delay more 100ms before SYS_PWROK on in S3 resume sequence
3.DGPU_RST_EC# on after SYS_PWROK on 5ms in S3 resume sequence

---------------------------------------------------------------------------------
2016/10/21                  EC Version 0.14.00                  Owner: Haidi.Wang
---------------------------------------------------------------------------------
File name: GH5KN_01.400		Checksum: 006C45FFh
1.Support power battery 
2.Add battery 18A current code
3.Remove DGPU_DSTATE polling, requested by thermal team
4.Cancel NoticebatteryLow to avoid system entering S4 with Win RS1 when 
  battery capacity is low
5.Integrate MyBat & MyFan AP control
6.Power LED and charge LED blink mutually when AC off line & in HP mode 

---------------------------------------------------------------------------------
2016/10/14                  EC Version 0.13.00                  Owner: Haidi.Wang
---------------------------------------------------------------------------------
File name: GH5KN_01.300		Checksum: 006C835Eh
1.Review GPIO as schematic changed for B phase
  (GPA7 for GPU ID pin & GPG0 for Boost FAN_EN1)
2.Update fan table
3.Add keyboard BL RGB function
4.Add GPE6 for ID pin ---- 0x7FB bit0 for 4 color zone(L) & single color zone(H).

---------------------------------------------------------------------------------
2016/9/22                  EC Version 0.12.00                  Owner: Haidi.Wang
---------------------------------------------------------------------------------
File name: GH5KN_01.200		Checksum: 006EF45Dh
1. Add GPG0 for Board ID ---- 0x7FB bit1 for G0 & G1. 